BUILDING ENVIRONMENT DESIGN - DESIGN, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS

Behrang FATHOLOLUMI, Behjat ASA, Afshin RAVA
1.617 402

Abstract


Abstract. The purpose of establishing standard is to determine methods and situation to provide heating flow based on water and cooling and heating systerm toward differnce temrature for systems. Determining temprature performance of water based on cooling and heating system and its conicidence with this standard is done by estimating dimension of planand a model. Therefore, integrated evaluation and estimation of water based on cooling and heating system is possible.

Surface tempreture and integration of heating surface tempreture /cooled, density of nominal heat between water and space, average difference temprature related to nominal and specified diagrams for relationship between heating density and variables determination are provided as results.


Keywords


Building Environment, Dimension, Embedded Heating and Colling Systems

Full Text:

PDF


References


Konzelmann. M. & G. Zöllner (2005). Thermische Leistungen flächenintegrierter Heiz- und Kühlflächen. HLH 56 (3). 30-34.

Konzelmann. M. and G. Zöllner (1982). Wärmetechnische Prüfung von Fußbodenheizungen. HLH 33 (4), 136-142.

ISO 7730, Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

Glück. B. (2007). Wärmeübergangskoeffizienten an thermisch aktiven Bauteiloberflächen und der Übergang zu Basiskennlinien für die Wärmestromdichte. Gesundheits-Ingenieur 128 (1). 1-10.

EN 563, Safety of machinery — Temperatures of touchable surfaces — Ergonomics data to establish temperature limit values for hot surfaces

ISO/TS 13732-2, Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature

EN 13202, Ergonomics of the thermal environment — Temperatures of touchable hot surfaces — Guidance for establishing surface temperature limit values in production standards with the aid of EN 563

ISO 13370, Thermal performance of buildings — Heat transfer via the ground — Calculation methods

ISO 7726, Thermal environments — Instruments and methods for measuring physical quantities

Konzelmann, M. & Zöllner, G. (1982). Wärmetechnische Prüfung von Fußbodenheizungen. Veröffentlicht in HLH, 33 (4). 136-142.

Kast, W. Klan, H. & Bohle, J. (1986). Wärmeleistung von Fußbodenheizungen. Veröffentlicht in HLH 37 (4)., 175-182

Konzelmann, M. & Zöllner, G. (1984). Auslegung und wärmetechnische Prüfung von Warmwasser-Fußbodenheizungen. Veröffentlicht in SHT, 4,. 255-259

Kast, W.; Klan, H. & Bohle, J.(1986). Wärmeleistung von Fußbodenheizungen Teil 2. Veröffentlicht in HLH 37 (10)., 497-502

Schmidt, P.(1981). Untersuchung zum Einfluss des Heizsystems und zum Außenflächenzuschlag bei der Wärmebedarfsrechnung; Fortschritt-Berichte der VDI- Zeitschriften. Reihe 6.

Konzelmann, M.(1988). Wärmeabgabe von Fußbodenheizungen.- Entwicklung einer Prüfmethode; Fortschritt-Berichte VDI. Reihe 19 : Wärmetechnik/Kältetechnik. 23. VDI- Verlag Düsseldorf .

Bohle, J. & Klan, H.(2000). Design of Panel Heating and Cooling Systems. ASHRAE Transactions .

Koschenz, M. & Lehmann, B. (2000). Thermoaktive Bauteilsysteme. tabs . EMPA. Switzerland.

Glück, B.(1989). Wärmeübertragung von Raumheizflächen und Rohren. VEB Verlag für Bauwesen. Berlin .

P.J. Schneider. (1957). Conduction Heat Transfer. 2nd Printing. Addison-Wesley Publishing Co. Inc.. Reading. MA.

Heiselberg, Per (1994). Stratified flow in Rooms with a Cold Vertical Wall. ASHRAE Trans. 100 (1).

Nordtest (2002). Design of floor heating systems. Report nr XXX (in press).

EN 1264-5, Water based surface embedded heating and cooling systems — Part 5: Heating and cooling surfaces embedded in floors ceilings and walls — Determination of the thermal output

EN 12828:2002, Heating systems in buildings — Design for water based heating systems

EN 12831:2002, Heating systems in buildings — Method for calculation of the design heat load EN 15377-1, Heating systems in buildings — Design of embedded water based surface heating and cooling systems — Part 1: Determination of the design heating and cooling capacity .