DISADVANTAGES OF NON-DESTRUCTIVE TESTING METHODS DURING THE PROCESS OF PRODUCTION AND CONSUMPTION OF CNG VEHICLES

Jahan TAGHIZADEH, Amir HEYDARI, Saeid MOSHTAGHPOOR
1.837 372

Abstract


Abstract. Damage to the vehicle CNG pressure vessels and the resulting injuries are always a concern of the consumer. Because of nowadays tend to use natural gas to reduce pollution in cities is increasing. So pay attention to the design, manufacture, inspection and related to the particular importance will be the last. An important part of this process is non-destructive tests. In recent years, these techniques have led to significant advances in many industries and use them to increase the reliability of reduce the possible accidents. As far as the world today is considered a classic of science. This article reviews the manufacturing defect that caused the damage, subject to the occurrence of non-destructive inspection and must be in the path of production and consumption of these reservoirs, has been paid.


Keywords


Non-destructive testing, CNG, Disadvantages, Consumption, Production

Full Text:

PDF


References


Hayashi T. "Guided wave animation using semi-analytical finite element method." In: Proceedings of the 16th World Conference on NDT, 2004.

Marzani A,Viola E, Bartoli I, Lanza di, Scalea F, RizzoP.A "semi-analytical finite element formulation for modeling stress wave propagation in axsymmetric damped waveguides." J Sound Vib2008; 318(9):488–505.

Srivastava A, Bartoli I, Salamone S, Lanza di Scalea F. "Higher harmonic generation in nonlinear wave guides of arbitrary cross-section." J Acoust Soc Am 2010; 127(5):2790–6.

YT Yu, PA Du. "Research on the correlation between measured material properties and output of eddy current sensor." In: Proceedings of the IEEE international conference on industrial technology, Hongkong: 2005. P.428–431.

Yu YT, Du PA."Two approaches to coil impedance calculation of eddy current sensor. Proc. IMech E, PartC: J. Mech Eng Sci 2008; 222(C3):507–15.

Yating Yu, Jia Guan. "Investigation of signal features of pulsed eddy current testing technique by experiments." Insight 2013; 55(9).

Colegrove P. "3-Dimentional Flow and Thermal Modeling of the Friction Stir Welding Process." Proceedings of the 2nd International Symposium on Friction Stir Welding, Sweden, August 2000.

Khandkar MZH, Khan JA, Reynolds AP. A. "Thermal Model of the Friction Stir Welding Process." Proceedings of IMECE2002, ASME International Mechanical Engineering Congress & Exposition, New Orleans, Louisiana, November, 2002.

Li HJ. "Coupled thermo-mechanical modeling of friction stir welding." PhD Thesis. UK: University of Strathclyde; 2008.