Design & modeling a novel Atomic Force Microscope (AFM) for detect roughness in turning machining

Omid GHAHGHAEİ, Saeed MALEKZADEH, Hamed NAEİMY
3.174 774

Abstract


Abstract. In this paper we design and modeling a novel AFM (Atomic Force Microscope) that use it in turning machining. We know that work piece roughness is very essential part in final product in every machining method specially in turning. In this case we want to know availability of using AFM in turning. So at first designed a kind of AFM with cantilever beam, piezoelectric and piezoresistance. After that we should modeling this design in our situation, for these we define some surface that may be happen in machining. So know modeled our design for sample surface. At the end of project a P control method has been used for controlling our processing.

Keywords


Atomic Force Microscope; turning machining; roughness; AFM control; cantilever beam

Full Text:

PDF


References


Jonah A. Harley, Advances in piezoresistive probes for atomic force microscopy, March 2000.

Varol A., Gunev I., Orun B., and Basdogan C., Numerical simulation of nano scanning in intermittent-contact mode AFM under Q control. arXiv:1204.3016.

Tortonese M., Yamada H., Barrett R.C., Quate C.F. and Edward L., Ginzton Laboratory, Atomic force microscopy using a piezoresistive cantilever. Solid-State Sensors and Actuators, 1991. Digest of Technical Papers, TRANSDUCERS '91., 1991 International Conference on

Georg Schitter, Member, IEEE, Karl J. Åström, Fellow, IEEE, Barry E. DeMartini, Member, IEEE, Philipp J. Thurner, Kimberly L. Turner, and Paul K. Hansma, Design and Modeling of a High-Speed AFM-Scanner. IEEE Transactıons on Control Systems Technology, 15 (2007) 5.

Miller E.H., A note on reflector arrays (Periodical style Accepted for publication),” IEEE Trans. Antennas Propagat., to be published.